Tsig™ TSG3200

 

The TelcoBridges Tsig TSG3200 is a high-density carrier-grade SS7/SIGTRAN gateway and converter.

Supporting multiple TDM interface types, the TSG3200 is the most costeffective SS7/Signaling gateway solution for service providers that is currently available on the market.

 

Product Characteristics:

  • 1U SS7/SIGTRAN gateway
  • TDM interface (ordering option)
    • 16 to 64 T1/E1 or
    • 1 to 3 DS3 or
    • 1 OC3/STM1 with APS
  • SIGTRAN, SS7
  • SCCP routing with Global Title Translation (GTT)
  • Supports conversion from ISDN and CAS protocols
  • Software upgradeable by T1/E1 increments
  • Hot-swap redundant power supply (AC or DC)
  • Tsig 1+1 solution option

 

Tsig 1+1 Protection Characteristics

  • Supports all TDM interface types: T1/E1, DS3 or OC3/STM1
  • Passive solution (no power required)
  • Enables full facility protection (TDM and IP)
  • Active/Standby architecture with two TSG3200 units
  • No single point of failure
  • Five nine’s redundancy

 

Interfaces

PSTN interfaces

  • 16 to 64 T1/E1 or
  • 1 to 3 DS3 or
  • 1 OC3/STM1 with APS
  • Independently configurable per port
  • SCSI connectors to RJ48C patch panel

Packet interfaces

  • Up to 4 Ethernet ports 100/1000Base-T
  • RJ45 connectors on rear of unit
  • Up to 16 different IP addresses
  • Ethernet port bonding and 802.1q VLAN support

 

High Availability & Redundancy

  • Power supply redundancy
  • IP port redundancy
  • Self-recovery software
  • Fault tolerant software
  • MTP2/SS7 links redundancy

 

Tsig 1+1 solution (optional)

The Tsig 1+1 solution extends the high-availability and
redundancy features of the TSG3200

  • SS7/SIGTRAN gateway redundancy (active/standby)
  • Full capacity protection (TDM and IP)
  • Configuration database redundancy
  • Seamless software upgrade
  • M3UA/MTP3/ISUP redundancy

Tsig 1+1 solution consists of:

  • 1 active unit and 1 standby unit
  • Up to 2 units 1+1 Patch Panel(s)

1+1 Patch Panels are passive (no power required)

 

Signaling

Simultaneously supports any combination or all of the following signaling protocols:

SS7

  • Up to 64 MTP2 links (56, 64, n x 56/64 kbps) or
    • 2 x HSL
  • Multiple redundant MTP2 links
  • Up to 64 originating point codes and 256 linksets
  • Up to 256 destination point codes
  • ISUP variants: ITU 92, ITU 97, ANSI 88, ANSI 92,
  • ANSI 95, Q.767, Telcordia 97, ETSI v3, China,
  • Singapore, UK, SPIROU, Japan NTT, Russia
  • SCCP routing and global title translation (GTT) based on called/calling party, SSN and Opcode

SIGTRAN

  • M2PA, M2UA, M3UA (IPSP, ASP, SG), IUA
  • SCTP (raw IP and UDP)
  • SS7 termination and/or relay supported
  • Up to 64 M2UA / M2PA links
  • Up to 64 M3UA peer server processes

ISDN PRI

  • Q.931 ISDN PRI (user and network side)
  • ISDN variants: NI-2, 4ESS, 5ESS, DMS-100, DMS-250, Euro ISDN ETSI NET5 (France, Germany, UK, China, Hong Kong, Korea), Euro Numeris (VN6), NTT (Japan), Australia
  • ISDN NFAS with D-channel backup

CAS

  • MF R1 (including E&M, loop start, ground start)
  • MF R2 (including standard ITU, Brazil, Mexico, Venezuela)
  • Customizable script files to implement any CAS variant

 

TMG-CONTROL (Call Control)

Toolpack framework call control

  • Call routing based on: trunk group, calling/called numbers (with digit manipulation) and/or various other protocol information/headers.
  • Customizable routing including priority-based, loadbalancing, black listing, call limiting, route retries, etc.
  • Customizable call cause code mapping
  • Programmable call routing: Access and manipulation of call parameters (SIP, SS7 and ISDN), including Nature of Address (NOA)
  • RADIUS authentication and authorization (supports multiple RADIUS servers)
  • NPA-NXX routing (over 5 million records)

Session management and billing

  • CDR generation (RADIUS and/or csv files)
  • Integrated lawful intercept (ETSI ES 201 671 v.2.1.1)

 

OAMP+T

Operation & Administration

  • Provisioning, management and status GUI
  • CLI and configuration file machine-to-machine interface (RESTful)
  • Configuration change audit logging
  • Access, user and privilege management
  • SNMP V2, V3 GET, TRAPs (alarms)
  • Extensive SNMP call statistics MIBs

Maintenance

  • 2 Ethernet control ports 100/1000Base-T
  • 1 USB Type B serial port
  • 1 RJ45 RS232 serial port
  • GUI-based and CLI system upgrade
  • GUI-based configuration copy, backup and restore
  • Storage for multiple software versions
  • Storage for multiple configuration files
  • Extensive system status display

Provisioning

  • Non-service affecting configuration changes
  • Offline configuration validation
  • Multiple configuration files archive
  • Northbound API (RESTful) for automated provisioning

Network Analytics (TB Analytics)

  • Live call trace with protocol information and ladder diagrams
  • Live test call with media playback and recording
  • TB Sigtrace – Protocol signaling capture into pcap files
  • Media call recording (scriptable for calling and called numbers)

Maintenance

  • Replaceable fan filters

 

Dimensions & Weight

TSG3200

  • 1U, 19” rackmount
  • 1.75” (44.5 mm)H x 16.9” (429 mm)W x 16” (406 mm)D
  • 14.5 lbs (6.6 kg)

TSG3200 1+1 patch panels

  • 1U, 19” rackmount
  • 1.75” (44.5 mm) H x 16.9” (429 mm) W x 5.25” (133 mm) D
  • 3.4 lbs (1.6 kg)

 

Regulatory Compliance

Safety

  • CAN.CSA C22.2
  • EN 60950-1:2005
  • EN 60950-1:2006

EMC

  • FCC Part 15:2013, Subpart B,
  • CE Mark (EN55022:2010, Class A, EN61000, ETSI EN 300 386)

 

Electrical Characteristics

  • 90 to 260 VAC, 47 to 63 Hz or -36 to -72 VDC
  • Hot-swap redundant power supply (AC or DC)
  • Maximum 138W power consumption

 

Environmental

  • Operating temperature: 0 to +70 °C, 95% rel. hum. non-condensing
  • Storage temperature: -10 to +85 °C, 95% rel. hum. non-condensing
  • Designed to meet NEBS Level 3
  • RoHS compliant