Tmedia™ TMG800

 

 

 

The TelcoBridges Tmedia TMG800 is our low density carrier-grade VoIP gateway. Software upgradeable from 1 to 16 T1/E1, the TMG800 is the most cost-effective VoIP gateway solution for service providers that is currently available on the market.

 

Product Characteristics

  • 1U VoIP gateway
  • 32 to 512 VoIP channels with universal codecs
  • 1 to 16 T1/E1
  • SIP, SIGTRAN, SS7 ISUP, ISDN PRI, E1 CAS R2, T1 CAS R1, H.248
  • Software upgradeable by single T1/E1 and 32 VoIP channel increments
  • Dual feed redundant power supplies (AC or DC)
  • Tmedia 1+1 solution option

Front and Rear View

Capacity and Voice Processing

  • 32 to 512  VoIP channels with universal codecs

PSTN Interfaces

  • 1 to 16 T1/E1 (software upgrade)
  • Configurable per port for T1 or E1
  • RJ48C connectors on rear of unit
  • Port status LEDs

VoIP Interfaces

  • Up to 6 Ethernet ports 100/1000Base-T
  • RJ45 connectors on rear of unit
  • Up to 16 different IP addresses
  • Ethernet port bonding and 802.1q VLAN support

Vocoding

  • Universal codecs: G.711, G.723.1, G.726, G.729ab, T.38 V.17, clear mode (RFC 4040)
  • Other codecs: G.722, G.722.2 (AMR-WB), G.728, G.729eg, iLBC, AMR, EVRC, GSM FR/EFR, QCELP, T.38 V.34

Fax/Modem/Data

  • T.38 fax relay (V.17 and V.34)
  • Automatic G.711 fallback, modem and data pass-through
  • NSE, VBD support
  • Clear mode (RFC 4040)

DTMF relay

  • RFC 2833/4733, SIP INFO method, in-band

Echo Cancellation

  • G.168 echo cancellation
  • 128 ms echo tail on all channels simultaneously

Voice Processing

  • Adaptative and programmable jitter buffer (20 to 200 ms)
  • Voice activity detection (VAD)
  • Comfort noise generation (CNG)

Voice recording and announcement playback
(optional)

Up to 512 optional channels

 

High Availability and Redundancy

  • Power supply redundancy
  • IP port redundancy
  • Self-recovery software
  • MTP2/SS7 links redundancy

Tmedia 1+1 solution (optional)

The Tmedia 1+1 solution extends the high-availability and redundancy features of the TMG800

  • VoIP gateway redundancy (active/standby)
  • Full capacity protection (TDM and IP)
  • Configuration database redundancy
  • Seamless software upgrade
  • Fault tolerant software
  • M3UA/MTP3/ISUP redundancy

Tmedia 1+1 solution consists of:

  • 1 active Tmedia unit and 1 standby Tmedia unit
  • 1 or 2 Tmedia 1+1 Patch Panel(s)
  • 1+1 Patch Panels are passive (no power required)

 

1+1 Patch Panel and Two Tmedia Units

 

Signaling

Simultaneously supports any combination or all of the following signaling protocols:

SIP

  • Supported RFCs: 2327, 2833, 2976, 3204, 3261, 3262, 3263, 3264, 3311, 3323, 3325, 3326, 3372, 3389, 3398, 3515, 3551, 3555, 3578, 3581, 3665, 3666, 3764, 3891, 4028, 4694, 4733, 5806
  • SIP-I/SIP-T
  • Extensive SIP header manipulation

SS7

  • Up to 64 MTP2 links (56, 64, n x 56/64 kbps) or 2 x HSL
  • Multiple redundant MTP2 links
  • Up to 64 originating point codes and 256 linksets
  • Up to 256 destination point codes
  • ISUP variants: ITU 92, ITU 97, ANSI 88, ANSI 92, ANSI 95, Q.767, Telcordia 97, ETSIv2, ETSIv3, China, Singapore, UK, SPIROU, Japan NTT, Russia

SIGTRAN

  • M2PA, M2UA, M3UA (IPSP, ASP, SG), IUA
  • SCTP (raw IP and UDP)
  • SS7 termination and/or relay supported
  • Up to 64 M2UA/M2PA links
  • Up to 64 M3UA peer server processes

ISDN PRI

  • Q.931 ISDN PRI (user and network side)
  • ISDN variants: NI-2, 4ESS, 5ESS, DMS-100, DMS-250, Euro
  • ISDN ETSI NET5 (France, Germany, UK, China, Hong Kong, Korea), Euro Numeris (VN6), NTT (Japan), Australia
  • ISDN NFAS

CAS

  • MFC R1 (including E&M, loop start, ground start)
  • MFC R2 (including standard ITU, Brazil, Mexico, Venezuela)
  • Customizable script files to implement any CAS variant

 

Tctrl (Call Control)

Embedded Call Control

  •  Call routing based on: trunk group, calling/called numbers (with digit manipulation) and/or various other protocol information/headers.
  • Customizable routing including priority-based, load-balancing, black listing, call limiting, route retries, and more.
  • Customizable call cause code mapping
  • Programmable call routing: Access and manipulation of call parameters (SIP, SS7 and ISDN), including Nature of Address (NOA)
  • RADIUS authentication and authorization (supports multiple RADIUS servers)
  • NPA-NXX routing (over 5 million records)
  • SIP-based local number portability and CNAM lookup

H.248 (MEGACO) Call Control

  • ITU-T H.248 versions 1 and 2
  • UDP, SCTP, IPSec transport
  • DTMF and fax detection
  • Call progress, DTMF and COT tone generation
  • Call quality and inactivity alerts
  • H.248 control port redundancy (supports virtual IP)

Session Management and Billing

  • SIP peer availability polling
  • RTP inactivity monitoring, RTCP
  • CDR generation (RADIUS and/or csv files)
  • Integrated lawful intercept (ETSI ES 201 671 v2.1.1)

 

OAMP+T (Web-based interface)

Operation and Administration

  • Configuration, management and status GUI
  • CLI and configuration file machine-to-machine interface
  • Configuration change audit logging
  • Access, user and privilege management
  • SNMP V2, V3 GET, TRAPs (alarms)
  • Extensive SNMP call statistics MIBs

Management

  • 2 Ethernet ports 100/1000Base-T
  • 1 USB Type B serial port
  • GUI-based and CLI system upgrade
  • GUI-based configuration copy, backup and restore
  • Storage for multiple software versions
  • Storage for multiple configuration files
  • Extensive system status display

Provisioning

  • Non-service affecting configuration changes
  • Offline configuration validation
  • Multiple configuration files archive
  • Machine-to-machine configuration interface

Network Analytics (TB Analytics)

  • Live call trace with protocol information and ladder diagram
  • Live test call with media playback and recording
  • TB Sigtrace - Protocol signaling capture into pcap files
  • Media call recording (scriptable for calling and called numbers)

Maintenance

  • Replaceable fan filters

Dimensions and Weight

  • 1U, 19” rackmount
  • 1.75” (44.5 mm) H x 16.9” (429 mm) W x 16” (406 mm) D
  • 14 lbs (6.4 kg)

1+1 patch panel (8 T1/E1)

  • 1U, 19” rack mount
  • 1.75” (44.5 mm) H x 16.9” (429 mm) W x 5.25” (133 mm) D
  • 3.4 lbs (1.6 kg)

1+1 Patch Panel

Electrical Characteristics (Power Input)

  • 90 to 260 VAC, 47 to 63 Hz, -32 to -72 VDC
  • Dual feed redundant power supplies (AC or DC)
  • Maximum 70W power consumption

Regulatory Compliance (UL/CSA 60950, CSA C22.2)

Safety

  • CAN.CSA C22.2
  • EN 60950-1:2005
  • EN 60950-1:2006 

EMC

  • FCC Part 15:2013, Subpart B, CE Mark (EN55022:2010, Class A, EN61000, ETSI EN 300 386)

 

Environmental

  • Operating temperature: 0 to +70 °C, 95% rel. hum. non-condensing
  • Storage temperature:-10 to +85 °C, 95% rel. hum. non-condensing
  • Designed to meet NEBS Level 3
  • RoHS compliant